|
| |
|
|
| Manufacturer Specific Interoperation Information |
| This information is provided solely to assist Lithonia
Controls product users in evaluating integration opportunities with other
manufacturer's building automation systems using BACnetTM.
Companies or products mentioned here are not necessarily endorsed by
Lithonia Lighting. The content of this page will be updated and expanded
as additional information becomes available. |
Alerton Technologies
www.alerton.com
| The Alerton BACtalkTM
system is a good match-up for Synergy because it is both
native BACnet and directly supports ARCNET RS485 which is the standard
network physical layer for Synergy. The Synergy ARCNET com line can
be connected directly to the BACtalk LSi network controller which acts as
a router. Several Lithonia/Alerton projects are currently under
construction. More information will be provided after these are up
and running. |
American Auto-Matrix
www.aamatrix.com
| American Auto-Matrix is preparing to introduce an IP based
BACnet workstation package for building automation applications.
Lithonia is currently in testing with Auto-Matrix to insure complete
compatibility between the products at introduction. It is
anticipated that interconnection will occur at the Ethernet level. |
Automated Logic
www.automatedlogic.com
| Synergy is a good fit with Automated Logic because of their
commitment to BACnet and support of ARCNET in much of their product line
including the InterOpTM
products. Lithonia has successfully tested with Automated Logic and
is currently installing several interoperable projects with them. We
will provide more information on these after they are up and running. |
Delta Controls
www.deltacontrols.com
| Delta offers a full line of native BACnet building
automation products. Currently, Delta does not offer an ARCNET
network solution so interconnection would be made at the Ethernet level
via a router. We have done testing with with Delta but have not yet
installed any interoperable systems with them. |
Johnson Controls
www.jci.com
| This major supplier of building automation products and
services offers MetasysR
BACnet System Integrator (see the press release: Release81).
This is a software solution for integrating their MetasysR
system with other BACnet devices such as Synergy via Ethernet. Interoperability
testing with Johnson has been successfully conducted using the
BACnet System Integrator and Synergy is listed with JCI as compatible.
One installation is currently up and running in the Minneapolis
area. |
Trane
www.trane.com
| Trane offers their Tracer SummitR
building automation system with integral BACnet compliance at
the Ethernet LAN level. Lithonia/Trane testing has not been
completed at this time. However, the Tracer Summit BACnet PICS for
the BCU and PC Workstation, as printed in their publication BAS-PR001-EN (Tracer Summit -
BAS-PRC001-EN), indicates complete BACnet compatibility with Synergy. |
|
