Top Left Background Image   Top Right Background Image
Did you find what you need?
  
 

TWP


Die-Cast Wall Pack, Polycarbonate Refractor


Bookmark and Share
Intended Use

For entrances, loading docks, walkways and vehicle ramps. Not recommended for applications with frequent exposure to harsh chemicals or commercial cleaning fluids (e.g., car washes). Installations in such environments may lead to premature failure of the luminaire and void the warranty.

Construction

Housing: Rear housing is rugged, die-cast aluminum. Corrosion-resistant, captive external hardware includes slotted hex-head and tamperproof fasteners. Finish is dark bronze (DDB) corrosion-resistant polyester powder.

Optics

Reflector is aluminum, finished in white enamel. Front housing and refractor are one-piece, injection-molded, UV-stabilized polycarbonate. Standard finish: front cover has an opaque lower portion and dark bronze painted upper portion; back housing is dark bronze polyester. Refractor is sealed and gasketed to inhibit the entrance of outside contaminants.

Nighttime Friendly™ - Order with full shield (FS) option, vandal resistant polycarbonate front cover, 400W max.

Electrical

Ballast: All ballasts are 100% factory tested. High reactance, high power factor for 150W and below. Constant wattage autotransformer for 175W. MH: 150W and below are standard with pulse-start ignitor technology. CSA, NOM or INTL required for probe start shipments outside the U.S. for 175M. Not available in 175M with SCWA. Compact fluorescent uses an electronic high-frequency ballast.

Socket: Glazed porcelain medium based (mogul based 175W), horizontally oriented with copper alloy, nickel-plated screw shell and center contact. UL Listed 660W, 600V for medium base; 1500W, 600V for mogul base. 4KV pulse rated. Fluorescent is four-pin positive latching thermoplastic. LPI is standard 35K for CFL.

Installation

Top 3/4" threaded wiring access. Back access through 3/4" opening. For feed-thru wiring, use condulet tee (not included). Mount on any flat, non-combustible vertical surface.

Listings

UL Listed (standard). CSA or NOM Certified (see Options). UL Listed for 25°C ambient and wet locations. IP65 rated.

Bottom Left Background Image   Bottom Right Background Image