LED Vertical Display Lighting

Ideal for use in vertical reach-in freezers,vending machines, trophy cases and retail display cases. When paired with the SensorSwtich aisle motion sensor kit, you will maximize your energy savings. Certain airborne contaminants can diminish integrity of acrylic.

Housing: Low-profile lightweight aluminum extrusion with a black anodized finish. Sealed on each end with a black neoprene gasket cap.

Lens: Durable, clear polycarbonate with a treated surface to prevent scratching.

Reflector: Uniquely designed from aluminum material for high reflectivity and superior uniformity.

Features 90° cut-off angle for reduced glare.

LEDs: Printed circuit board with direct attachment to the housing for maximum thermal performance. L70 @ 50,000 hours.

AccuDrive™ Drivers: Class 2 for U.S. only; low voltage limited energy for Canada. 50-100W LED driver has four output channels that independently operate fixtures for 2-, 3-, 4-, 5-, or 6-door solutions. 0-10V dimming, DALI enabled. 1.2 A, 24-52 VDC operating voltage. 2- and 3-door driver is a low-power solution; 4-, 5-, and 6-door driver is a high-power solution. The AccuDrive single-driver solution saves cost on initial system, installation and maintenance.

Wiring harness: 18 AWG standard wiring connects to the control unit. A wiring harness is shipped standard with each AccuDrive driver to ensure power is distributed equally to each fixture.

Controls: Optional on/off occupancy sensor provides 10-12 ft. radial coverage when mounted atop a 7' refrigerator/freezer. Offers multiple time-delay settings; from 30 seconds to 4 minutes at 30-second intervals or from 5 minutes to 40 minutes at 5-minute increments. Occupancy sensor is UL and C-UL listed and is warranted for five years. For more information, refer to www.sensorswitch.com/datasheets/RA-KIT.pdf.

An optional high/low dimming sensor is available (100% to 25%). An internal timer, factory set at 30 seconds keeps the lights on during brief periods of inactivity. For more information, refer to: www.sensorswitch.com/datasheets/RA-15-D.pdf.

Two mounting brackets provided for both center and end units. Mounted in vertical orientation. Fixture may be mounted horizontally when used with the AccuDrive driver.

CSA Listed for -30°C to 30°C. Damp located listed. Meets DesignLights Consortium (DLC) criteria for vertical Refrigerated Case Lighting and Display Case Lighting. Product is NSF Listed.