Top Left Background Image   Top Right Background Image
Did you find what you need?


Round Straight Steel

Bookmark and Share
Intended Use

Round straight steel general purpose pole for up to 30-foot mounting heights.


Shaft: Weldable grade, hot rolled, commercial-quality carbon steel tubing with minimum yield of 42,000 psi. Uniform wall thickness of .120". Shaft is one piece with a full-length, longitudinal, high-frequency electric resistance weld. Uniformly round in cross-section down length of shaft with no taper.

Anchor base: Fabricated from hot-rolled carbon steel plate with 3/4" thickness conforming to ASTM A36. Base plate and shaft are circumferentially welded top and bottom.

Anchor bolts: Fabricated from carbon steel bar with minimum-yield strength of 55,000 psi. Bolts have an "L" bend on lower end and are galvanized a minimum of 12 inches on the threaded end per ASTM A-153. Each anchor bolt is furnished with two hex nuts and two flat washers.

Grounding: Provision located inside hand hole rim. Grounding hardware is not included (provided by others).

Hand hole: Reinforced hand-hole rim located 18" above base. Includes cover with attachment screws.

Hardware: All fasteners are high-strength galvanized or zinc-plated or stainless steel.

Top cap: Removable top cap provided with drill-mount poles.

Base cover: Includes full-base cover finished to match pole.

Finish: Must specify finish.

Check out POLESCENTRAL for additional resources and solutions.

Bottom Left Background Image   Bottom Right Background Image