Top Left Background Image   Top Right Background Image
Did you find what you need?


6" LED Commercial Downlight

Bookmark and Share

Also Available:
Reality 6" LED Module

Intended Use

LED Downlight fixture for use in remodel or new construction applications where energy savings, long life, and quality of light are required.  Typical applications include corridors, lobbies, conference rooms, and private offices.


LP6LN (New Construction): Rugged, 16-gauge galvanized steel mounting frame with torsion spring bracket to mount the finishing module. Vertically adjustable mounting brackets that use 16-gauge flat bar hangers (included), 1/2” conduit or C channel T-bar fasteners. Provides 3-3/4” total height adjustment.

6VL (New Construction): Galvanized steel mounting/plaster frame with torsion spring bracket to mount the finishing module. Integral galvanized bar hangers span up to 24” o.c. and feature built-in T-bar clips and nailers for T-bar or wood joist installations.

6VLR (Remodel): Galvanized steel remodel mounting/plaster frame with torsion spring bracket to mount the finishing module. Four (4) remodel ARC clips included for remodel installation.

All frames are equipped with galvanized steel junction box UL Listed for through wire applications. Junction boxes equipped with two combination 1/2”-3/4” and three 1/2” knockouts for straight-through conduit runs and removable access doors. Capacity: 4 (2 in, 2 out), No. 12 AWG conductors, rated for 90°C.

Post installation adjustment possible from below the ceiling.

Maximum 1-1/2” ceiling thickness.

LED Trim: Rugged, one-piece, die-cast heat sink design for optimal thermal management.  Wet location rated lens is tightly fitted to the housing to reduce the ingress of dust.


Elliptical upper reflector and micro prism lens, provides precise beam control. Lower splay recesses optical system into the ceiling to reduce glare and provide a traditional PAR look. Standard fixture has a 0.65 spacing criteria. The luminaire is also available with a 0.95 spacing criteria option for use in general/ambient lighting applications.



On-board circuitry to ensure against wiring errors.

Thermal protection provided against improper insulation use.

High-efficiency, electronic LED 0-10V dimming driver mounted to the junction box, dims luminaire to 15% light output.

For dimming fixture requires two (2) additional low-voltage wires to be pulled.

The system maintains 70% lumen output for more than 50,000 hours.

Input wattage for 1000L is 14.2 W, 74 lumens per watt. Input wattage for 1500L is 18.8 W, 85 lumens per watt.

Actual wattage may differ by +/-15% when operating between 120-277V +/-10%.


CSA certified to US and Canadian safety standards. Wet location listed.

Bottom Left Background Image   Bottom Right Background Image