Top Left Background Image   Top Right Background Image
Did you find what you need?
  
 

LCP


6" Shallow Incandescent New Construction Housing


Bookmark and Share
Intended Use

Recessed incandescent housing for 2x6 new construction. Approved for direct burial in insulation. Not for pulling wires.

Construction

Air-tight, aluminum housing with engineering-grade thermoplastic frame and junction box with four built-in ROMEX® clamps and ground wire. Pre-assembled poke-home connectors for ease of wiring. Rated for 90°C. Factory-installed captive bar hangers that span up to 24 o.c. and feature stepped shank nail with integral T-bar locks. Two locking screws hold fixture position. Socket clips to trim to ensure proper and consistent lamp position.

Trim retention (clips): Retaining clips riveted to top of reflector hold trim inside housing.

Trim retention (TOR): Two side-mounted torsion springs on the trim and two receiving brackets in the can, ensure a consistently tight fit with the ceiling.

Suitable for ceilings up to 1-1/2" thick.

Listings

UL Listed to U.S. and Canadian safety standards.

Bottom Left Background Image   Bottom Right Background Image