Top Left Background Image   Top Right Background Image
Did you find what you need?
  
 

L7XPR


6" Shallow Incandescent Remodel Housing


Bookmark and Share
Intended Use

Recessed incandescent housings for 2x6 remodel construction. Approved for direct burial in insulation and all ceiling and wiring types.

Construction

L7XPR: Air-tight aluminum housing with heavy-gauge galvanized steel raceway arm. Remodel clips for installation in existing plaster, sheet rock or mechanical ceilings. Galvanized steel junction box with three built-in ROMEX® clamps and ground wire. Not suitable for pulling wires. Rated for 90°C. Socket clips to trim to ensure proper and consistent lamp position.

Trim retention (clips): Retaining clips riveted to top of reflector hold trim inside housing.

Trim retention (TOR): Two side-mounted torsion springs on the trim and two receiving brackets in the can, ensure a consistently tight fit with the ceiling.

Suitable for ceilings up to 1-1/2" thick.

Listings

UL Listed to U.S. and Canadian safety standards.

Bottom Left Background Image   Bottom Right Background Image