Top Left Background Image   Top Right Background Image
Did you find what you need?


6" Compact Fluorescent MVOLT New Construction Housing

Bookmark and Share
Intended Use

Recessed housing rated IC and Non-IC. For new construction only. Approved for all ceiling and wiring types. Approved for direct burial in insulation.


Air-tight standard. Tested to meet current energy codes. Aluminum housing with galvanized steel pan. Factory-installed captive bar hangers that span up to 24 o.c. and feature stepped shank nail with integral T-bar locks. Two locking screws hold fixture in position. Galvanized steel junction box with four built-in ROMEX® clamps; four 1/2" and two 3/4" knockouts with slots for pryout. Rated for 90°C. Ground wire provided. Removable J-box doors for easy access.

Trim retention (clips): Retaining clips riveted to top of reflector hold trim inside housing.

Trim retention (TOR): Two side-mounted torsion springs on the trim and two receiving brackets in the can, ensure a consistently tight fit with the ceiling.

Suitable for ceilings up to 1-1/2" thick.


Multi-volt (MVOLT), 120V through 277V, electronic ballast with end of life protection standard with TRT lamps. Requires four-pin lamp. Socket assembly clips to top of housing to prevent paint overspray. Socket attaches to reflector to ensure proper and consistent lamp position. Thermal protection provided against improper lamp usage.

Socket base: 13W four-pin DTT (G24Q-1), TRT (GX24Q-1); 18W four-pin DTT (G24Q-2), TRT (GX24Q-2); 26W four-pin TRT (GX24Q-3).


UL Listed to U.S. and Canadian safety standards.

Bottom Left Background Image   Bottom Right Background Image