Top Left Background Image   Top Right Background Image
Did you find what you need?


Soft Corner Round Bollard

Bookmark and Share
Intended Use

For walkways, plazas or pedestrian areas.


Housing: KB_6: Bottom housing is 0.125" extruded aluminum. Top cover is 0.156" cast aluminum. KB_8: Bottom housing is 0.156" extruded aluminum. 42" overall height standard on KBD and KBA6. 43" overall height standard on KBA8. Flush-fitting lens is 1/4", clear, 100% virgin acrylic. All exposed hardware is tamper-resistant steel protected by a 1,000 hour corrosion-resistant coating. Four 1/2" x 11" anchor bolts with double nuts/washers and 4 1/2" diameter bolt circle template provide for mounting (shipped separately). Dark bronze (DDB) corrosion-resistant polyester powder finish standard; other architectural colors available.


Reflector system incorporates an anodized, spun aluminum, flared cone and an anodized, hydroformed, fluted upper reflector providing a Type V (symmetric) cutoff distribution. Optional cylindrical lower reflector or cast aluminum louvers available.


All ballasts are copper wound and 100% factory tested. Electrical components are unitized on removable power module and accessible through bottom of bollard. Positive-locking quick disconnect on secondary circuit. Medium-base porcelain socket, 4KV pulse rated.


UL Listed (standard). CSA Certified (see Options). UL Listed for wet locations.

Bottom Left Background Image   Bottom Right Background Image