For streets, walkways, parking lots and surrounding areas.
Housing: Die-cast single-piece aluminum with nominal 1/8" wall thickness. Integral arm provides easy installation to pole or wall. Housing completely sealed against moisture or environmental contaminants.
Door Assembly: Die-cast door frame, impact-resistant, tempered, glass lens, 3/16" thick, fully sealed with one-piece tubular silicone gasket. Tool-less entry and closure via spring-loaded die-cast latches.
Finish: Standard finish is dark bronze (DDB) corrosion-resistant polyester powder finish. Other architectural colors available.
Anodized segmented reflectors for superior uniformity and control. Reflectors
attach with tool-less fasteners and are rotatable and interchangeable.
Friendly™ - Aeris™ die-cast housing, dedicated optical platform,
aesthetically pleasing tension rod assembly, 2 housing sizes, flat lens, 400W max.
House-side shield available in SR2, SR3 and SR4W.
150W and below utilize a high reactance, high power factor. 175W and above use a constant-wattage autotransformer ballast. Compact fluorescent uses an electronic high frequency ballast. Ballasts mounted on removable power tray with tool-less latch and have positive locking disconnect plugs. Ballasts are copper wound and 100% factory tested.
Socket: Porcelain, medium-base socket for AST1, mogul-base socket for AST2 , with copper alloy nickel-plated screw shell and center contact. Fluorescent is four-pin positive latching thermoplastic. UL Listed.
IP64 UL Listed (standard). CSA Certified or NOM Certified (see Options). UL
Listed for wet locations in lens-down orientation (damp location listed in
lens-up orientation). Meets IESNA full cutoff criteria. U.S. patent no. D447,
590. Canadian patent no. 94324.