Top Left Background Image   Top Right Background Image
Did you find what you need?


Aeris™ Area and Roadway Lighting HID CFL Outdoor

Bookmark and Share

Intended Use

For streets, walkways, parking lots and surrounding areas.


Housing: Die-cast single-piece aluminum with nominal 1/8" wall thickness. Integral arm provides easy installation to pole or wall. Housing completely sealed against moisture or environmental contaminants.

Door Assembly: Die-cast door frame, impact-resistant, tempered, glass lens, 3/16" thick, fully sealed with one-piece tubular silicone gasket. Tool-less entry and closure via spring-loaded die-cast latches.

Finish: Standard finish is dark bronze (DDB) corrosion-resistant polyester powder finish. Other architectural colors available.


Anodized segmented reflectors for superior uniformity and control. Reflectors attach with tool-less fasteners and are rotatable and interchangeable.

Nighttime Friendly™ - Aeris™ die-cast housing, dedicated optical platform, 2 housing sizes, flat lens, 400W max. House-side shield available in SR2, SR3 and SR4W. 


150W and below utilize a high reactance, high power factor. 175W and above use a constant-wattage autotransformer ballast. Compact fluorescent uses an electronic high frequency ballast. Ballasts mounted on removable power tray with tool-less latch and have positive locking disconnect plugs. Ballasts are copper wound and 100% factory tested.

Socket: Porcelain, medium-base socket for AS1, mogul-base socket for AS2, with copper alloy nickel-plated screw shell and center contact. Fluorescent is four-pin positive latching thermoplastic. UL Listed.


Heavy-duty easy-mount block attaches to pole or wall to provide ease of installation as well as ensured alignment and leveling.

Mounting: Mounting options include Square (SPA) or Round Pole (RPA) mounting; Decorative Arms - Curved and Straight; Wall bracket(WBA); Mast Arm Adaptor (ASKMA1); Suspend Mounting (AST).


IP64 UL Listed (standard). CSA Certified or NOM Certified (see Options). UL Listed for wet locations in lens-down orientation (damp location listed in lens-up orientation). Meets IESNA full cutoff criteria. U.S. patent no. D447, 590. Canadian patent no. 94324.

Bottom Left Background Image   Bottom Right Background Image